Daniel Liquid & Gas Ultrasonic Flow Meters

The 67C Series regulators are typically used to provide constantly controlled, reduced pressures to pneumatic and electropneumatic controllers and other instruments. These direct-operated regulators are suitable for most air or gas applications. Other applications include providing reduced pressures to air chucks, air jets, and spray guns.

Daniel Differential Pressure Products

The 627 Series direct-operated pressure reducing regulators (figure 1) are for low and high pressure systems. These regulators can be used with natural gas, air, or a variety of other gases. Performance characteristics vary according to construction

Daniel Turbine Flow Meters

The proven reliability and accurate regulation of the 1301 Series regulators make them ideal for numerous high pressure drop applications. They are direct-operated, high-pressure regulators designed for inlet pressures up to 6000 psig(414 bar). The Type 1301F can handle outlet pressures from 10 to 225 psig (0,69 to 15,5 bar) in three ranges and the Type 1301G can handle outlet pressures from 200 to 500 psig (13,8 to 34,5 bar) in one range. These multi-purpose regulators can be used as pilot supply or pressure-loaded regulators where highpressure operating medium must be reduced for use by gas regulator pilots or pressure-loaded regulators. Their rugged design offers versatility for a wide variety of applications including air, gas, water, and other liquids. An optional springcase with a tapped vent and adjusting screw closing cap is available that enables the Type 1301F to be used as a pressure loaded regulator.

Copyright © 2014 Em. All Rights Reserved.

Best viewed in Firefox 2.0 & above | Internet Explorer 7.0 & above.